Car Dent Remover Tool, Paintless Dent Repair Dent Puller Kit Slide Hammer Tools With 18pcs Thickened Blue Tabs For DIY Automobile Body Dent Removal

Material:Other Materials

Item ID:FC01812

How To Choose:
50cm Long----repair For Thick Metal
42cm Middle----repair For Normal Thickness Metal
12cm Short----repair For Thin Metal
50cm/19.69inch Long----for LarDent More Than 15cm/5.91inch
42cm/16.54inch Normal----for Middle Dent 5cm/1.97inch-15cm/5.91inch
12cm/4.72inch Short----for Small Dent 0-5cm/1.97inch

Why Recommend It To You ?
 , Suitable For Different Size Dents. Updated Quality
High Quality Tools. Automotive Body Repair Tools.
Newest Pac, More Conveniently TaAnd Operating.
Each Tool Is High Quality And Good Repution From Professional User.
Faster MaShipping And PacSafety.

Note: You Need To Prepare Your Own Hot Melt Glue Gun.

How To Use:
1.Clean The Dent With A Clean Wet Cloth;
2.Mount The Glue Stick Into The Glue Gun,pull The Trigger To Let The Glue Stick Enter Into The Glue Gun, Connect The Power Source And Preheat For 5 Minutes;
3.Use A Proper Drawing Gasket. LarDent Requires A LarDrawing Gasket. (Note: The Larger The
drawing Gasket Is, The Larger The Drawing Force Is); 4. Pull The Trigger And Apply The Drawing Gasket With Extruded Glue (The 4 Holes Of Gasket Should Be Applied With Hot Melt Glue);

5. Fast Place The Drawing Gasket With Hot Melt Glue At The Center Of Dent, Press Lightly Until The Glue Cures And Adheres (Let The Glue Cool For About 8 Minutes. The Cooling Time Should Be Less Than 10 Minutes And Should Be Shorter Slightly In Winter);
6. Align The T-shaped Repairer And Press The Drawing Gasket With Hot Melt Glue, Pull The Sliding Rod Backwards To Pull Up The Dent;
7. Check With A Line Board. If Dent Still Exists, Knock It Slightly With A Flattening Hammer Or Pen;

8. Clean The Repaired Place With A Clean Wet Cloth.

PackaContents:
1* Car Dent Puller Tools
18* Blue Glue Tabs/ Lifter Glue Puller
Only The Above PackaContent, Other Products Are Not Included.

Note: We Only Include The Puller, You Will Need To Prepare Your Own Glue Gun, Squeegee And Other Things. For Specific Installation Steps Please See The Following Diagram.