Skip to product information










Power Circuit Probe Tester 6-24V DC Test Light Short Circuit Automotive Component Electrical Polarity Identify Continuity Tester Overload Protection
$13.04
Power Mode:Room electrical/hard wiring
Operating Voltage:â¤36V
Material:Insulation Materials
Battery Capacity (mAh):0
Item ID:VA07551
Power Probe Circuit Diagnostic Tool: This multifunctional circuit tester can check switches, relays, and the on-off of diodes, fuses, and circuits, which can help us ly find out whether there is a short circuit or poor grounding of components in the vehicle's electrical system. Avoiding a short circuit or instant overload of the component leads to a blown fuse or circuit breaker tripping
ãShort Circuit Following and Locating Test LightãThe circuit tester is suitable for diagnostic in all 6V to 24V DC vehicle electrical systems. It can check switches, relays and the on-off of diodes, fuses and circuits, which can help you reduce diagnostic time in automotive electrical systems. In most cases, short circuit or instant overload of component will lead to blown fuse or circuit breaker tripping.This probe tester can assist you tracing problem wires and locating brea.
ãPolarity Identification & Continuity Testing & Jumper Lead OperationãThis power circuit probe tester can help you ly identify positive and negative polarity of electric cables and plugs of vehicles. When the probe tip contact to the positive electrode, the RED light on. When the probe tip contact to the negative electrode, the GREEN light on. It can also test for continuity and do the jumper lead operation with the assistance of its auxiliary ground lead.
ãActivate and Test Components In/Out of Vehicleâs Electrical System&Poor Ground Contact TestingãPower circuit probe tester could activate components in and out of the vehicleâs electrical system, test and check the components if defective or not, or if rating current of component is higher than that of the circuit tester. For some components, the negative terminal is required to be well grounded to cope with the flow of larcurrents, this circuit tester is a good tool to test their grounding.
ã13FT Long Extension Cable&LED Light Prompt&Buzzer Warning&Highly Sensitive Probe&Clips with Strong BiteãThe cable length of the circuit tracer is about 4m(13ft) which allows you access and test any electrical system easily. The LED indicator and buzzer warning can help you clear problems at a glance. Test light adopts advanced high sensitivity probe, which provides you and accurate detection. Its clips with strong bite force which not easy to fall off, providing you better experience.
ã Self-Test & Overload ProtectionãBefore you test a circuit or component, the test light can perform a self-test to ensure your tool is in good condition. Equipped with overload protection, when the current exceeds 7A, the circuit tester will disconnect the current automatically and give you a buzzer prompt. You can test poor ground contacts directly. Note: This electrical tester can not be used for 110/220V systems, it is only used for DC 6-24V systems. Do not use on AC voltage.
ãAutomatic Reset Test LightãWhen the circuit breaker trip is detected, the power circuit probe tester will sound a prompt to remind you that there is a short circuit problem. Then it will automatically reset within 3 to 5 seconds(the prompt sound will automatically turn off), so you can retest or go to test other places.
ãEasy Operation Circuit TesterãUnroll the leads. Clamp the red clip of the power circuit probe tester to the positive terminal of the vehicle's battery. Clamp the dark color clip to the negative terminal of the vehicle's battery. After a simple hook-up of the circuit tracer to the vehicle's battery, automotive technician can conduct a positive or negative battery current to the tip by rocthe power switch forward or backward.









